
Where we build
Deck Builder in Black Forest, Colorado
Bigfoot Decks & Landscapes designs and builds custom decks, covered structures, patios, and outdoor living in Black Forest, El Paso County, Colorado. The work is shaped by large wooded lots, snow that sits under ponderosa cover, and wildfire rules. Permits go through Pikes Peak Regional Building, and we pull them.

Why a Black Forest build is different
You are often framing a view, not screening neighbors. Lots are large, and the outdoor space is usually the point of the property. The ponderosa and the acreage change the plan before the railing choice does.
Snow sits longer under the trees. That drives the framing on anything with a roof, including a covered deck. Black Forest sits at about 7,300 ft. That elevation is a starting point. The parcel grade plane is what the snow table uses.
Wind and tree cover both matter. A roof that is reasonable in town can be the wrong structure under ponderosa shade, where snow stays. More on how we frame with steel is on our steel frame page.

Which code applies in Black Forest
Pikes Peak Regional Building covers the structure. The snow table was updated June 30, 2026. Ground snow load is 43 psf below a 7,000 ft grade plane and 57 psf at or above it. Flat roof snow load is 30 psf and 40 psf on that same split. Exposure factor, thermal factor, and importance factor are 1.0. Basic wind speed for Category I and II is 130 mph, and Exposure C is required. Read the PPRBD criteria. We confirm the grade plane for the parcel. We confirm frost depth with Pikes Peak Regional Building for your lot.
The city Class 1 and Class 2 map stops at the city limit, so unincorporated Black Forest follows the county rules. Our wildfire code page walks through that city map. El Paso County approved wildfire resiliency amendments, including the Wildfire Resiliency Code, on June 23, 2026. The county notice is on the land development code amendments page. Black Forest Fire Rescue began full enforcement on July 1, 2026, and the county notice says the code took effect in unincorporated El Paso County that day. See Black Forest Fire Rescue. We look up your lot: the location, the mapped fire-intensity class, and the scope of work. The district asks for a contractor compliance form before it releases the applicable permit. We still pull the building permit. El Paso County Planning may also review setbacks. A small detached deck can be exempt. The test is on the PPRBD permit page.
Decks and outdoor living
Black Forest is where a lot of our largest work happens. Multi-level decks, covered structures with screens, patios and stamped concrete, paver work, fire features, and landscaping can be one project.
See decks, covered decks, patios, and landscaping. Wildfire rules are on our wildfire code page, and the permit steps are in the permit explainer. More towns are on Where We Build. Finished work is in the portfolio.

Projects in Black Forest
Permits in El Paso County
Pikes Peak Regional Building reviews the deck in Black Forest, and we pull the permit. If setbacks need a county planning look, we handle that for your address.
We'll work with your community's review when it has one, and we prepare the submittal.

Questions about Black Forest
Do you build decks in Black Forest?
Yes. We build decks in Black Forest. Bigfoot is Wade and Taylor's family business, four generations on the Front Range. We're based in Colorado Springs and our crews travel to Black Forest for every job.
Is a Black Forest deck designed the same way as one in Colorado Springs?
No. Snow load, tree cover, and lot size change the framing, especially on anything with a roof. Ground snow load is 43 psf where the grade plane is below 7,000 ft, and 57 psf where it is at or above 7,000 ft. Black Forest sits at about 7,300 ft, which usually puts the lot in the higher band. We confirm the parcel grade plane before we size the frame.
What wildfire rules apply here? Is this the same as the Colorado Springs map?
No. The city Class 1 and Class 2 map stops at the city limit. For unincorporated Black Forest, the 2025 Colorado Wildfire Resiliency Code took effect in unincorporated El Paso County on July 1, 2026. Whether it applies depends on the mapped fire-intensity class and the scope of work. Black Forest Fire Rescue reviews applicable jobs. We look up the address before we quote, and we file the paperwork. The city map is explained on our wildfire code page.
Who pulls the permit, Pikes Peak Regional Building or the county?
Pikes Peak Regional Building reviews the structure. El Paso County Planning may also review setbacks. We pull the building permit. A narrow detached deck can fall outside the permit. The test is on the PPRBD permit page: one- and two-family homes, not over 200 square feet, not more than 30 inches above grade at any point within 36 inches of the deck, and not serving the required egress door.
Do you handle HOA or architectural review?
Yes. We'll work with your HOA's review process, and we'll tell you if your lot has one.
What materials do you use, and can they meet fire-aware requirements?
Steel framing is our standard. It stays flat, and it stands up to fire. Composite or PVC boards go on the walking surface, and we choose the board for your lot. The choice narrows if a fire code applies. Workmanship is five years on steel frames and ten on aluminum. The full term is covered, and both transfer if you sell. We check your lot before we specify the board.
Can you build a full outdoor living project, not just a deck?
Yes. The work includes custom decks, covered decks and screens, patios and hardscape including stamped concrete, landscaping, pergolas and pavilions, outdoor kitchens, and fire features, plus windows, doors, siding, and stucco. A lot of our largest projects are in Black Forest, including multi-level decks and covered structures.
How long does it take, and can I see a plan first?
Most residential decks run two to three weeks on site once permits clear. Permitting through Pikes Peak Regional Building typically adds two to four weeks. HOA review or a wildfire review can add more. A measured plan is included. A 3D Design Package is optional and credited toward your project.
Planning a Black Forest project
Tell us the address. We will look up the grade plane, the fire-intensity class, and which review applies before we draw.




